- Truck Camper
Pop Up Camper-230
Model information for dealers, importers and wholesale buyers.
Model Overview
Pro-230 is a pop-up truck camper with a catalogue sleeping capacity of 3. The camper body measures 3910 × 1910 × 1840 mm; internal dimensions are 3830 × 1830 × 1315 mm. Catalogue 0114, PDF page 33, lists a tare mass of 800 kg; the configuration sheet identifies this as an estimate.
A reference configuration lists a 90 L fresh-water tank, a 70 L waste-water tank and two 100 W solar panels. Confirm the equipment package, battery specification and destination-market electrical system in your quotation. For pickup fitment, provide the truck model, year, bed dimensions and payload rating so the mounting arrangement and fully loaded weight can be reviewed.
Key Specifications
3 people (catalogue)
Floor Plan
The reference layout sleeps 3, with an extendable double bed measuring 1330 × 2140 mm and a sofa bed measuring 1800 × 800 mm. The configuration sheet lists a 700 mm roof lift. Request the matching floor plan and drawings showing the roof lowered and raised to check access, storage and transport clearances.
360° Factory Tour
Take a 360° virtual tour of our state-of-the-art factory! Explore our workshops, product interiors, and showroom, and get an aerial view of the entire facility. Discover the craftsmanship behind our products and easily share or contact us for more information.
Specifications
Sleeping configuration:
Sleeps 3 people
1x Tent
1x Spring Mattress
1x Sofa bed
Batteries:
Lithium battery
Floor:
FRP + aluminum frame + XPS + PVC floor adhesive.
Lights:
LED Light
Equipment:
Two interior speakers and two exterior waterproof speakers
Material:
FRP + aluminum frame + XPS
Accessories:
Hand jack
Bathroom tent and bodywork tent
Catalog-listed bathroom equipment:
Inside shower
Cassette toilet
Confirm the standard and optional equipment, water-tank capacity, water-heater specification and pump details in the itemised quotation for your configuration.
Refrigerator
50 L DC 12 V refrigerator.
Battery
Lithium battery; capacity and battery-management specification to be confirmed.
Solar
20 A solar controller and two 12 V solar panels. Confirm the panel rating and supplied configuration.
Gas equipment
Copper gas pipe system with two 5 kg gas bottle racks. Confirm fittings and destination-market requirements.
Helpful technical guides
Advantages
Factory Overview
Review the Ecocampor workshop as part of your supplier evaluation. Discuss the model configuration, inspection points and production plan before placing a wholesale order.
You May Also Like
Sleeping capacity
3 people
- Body length
- 3,085 mm
- Width
- 2,100 mm
- Tare mass
- 450 kg
Sleeping capacity
3 people
- Body length
- 3,040 mm
- Width
- 2,160 mm
- Tare mass
- 600 kg
Sleeping capacity
3 people
- Body length
- 4,140 mm
- Width
- 2,200 mm
- Tare mass
- 800 kg
Build your next dealer range.
Let’s discuss your product range.
Tell us which model you are sourcing and where you plan to sell it. Share your estimated quantity and requirements so our team can prepare a relevant response.
- Model specifications and equipment
- Dealer and wholesale quotations
- Branding, packing and delivery requirements
Prefer email?
tom@ecocampor.com
Frequently Asked Questions
Which dimensions should I use to compare this model?
Catalogue 0114 lists 3910 × 1910 × 1840 mm for Camper body only. Compare models using the same measurement basis. Confirm the final dimensional drawing, accessories and transport dimensions with Ecocampor.
How should I assess vehicle compatibility and loading?
Tare mass is not fully loaded operating weight. Confirm water, equipment, luggage, occupants where applicable, permitted mass limits, axle loads and the intended tow vehicle or truck before ordering.
Which specification and equipment will be supplied?
Use the catalogue figures for initial selection. The final quotation and approved specification define the equipment, dimensions, weight ratings and destination-market requirements for your configuration.
Can I discuss dealer, OEM or ODM cooperation?
Yes. Share your target market, preferred model and expected order plan. Dealer requirements, investment, initial orders, service capability and territory arrangements are assessed for each market. OEM and ODM projects can be discussed with Ecocampor.
